Constant voltage
High efficiency, high reliability
Universal AC input/Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
100% full load burn-in test
2 years warranty
Input:
Voltage Range: 85 ~ 264VAC
FREQUENCY RANGE: 47 ~ 63Hz
AC Current: 0.35A/115VAC ; 0.25A/230VAC
Inrush Current: Cold start, COLD START 45A
Leakage Current: <2mA / 240VAC
Output:
|
Model No.
|
DC Voltage & Current
|
Voltage Tolerance
|
RATED POWER
|
RIPPLE & NOISE (max.)
|
Efficiency
|
|
NES-15-5
|
5.0V / 3A
|
2%
|
15W
|
150mVp-p
|
79%
|
|
NES-15-12
|
12V / 1.3A
|
1%
|
15.6W
|
150mVp-p
|
81%
|
|
NES-15-15
|
15V / 1A
|
1%
|
15W
|
150mVp-p
|
81%
|
|
NES-15-24
|
24V / 0.7A
|
1%
|
16.8W
|
200mVp-p
|
85%
|
|
NES-15-48
|
48V / 0.35A
|
1%
|
16.8W
|
240mVp-p
|
82%
|
Protection:
1. Overload Protection: 115 ~ 135% rated output power,
Protection type : Fold back current limiting, recovers automatically after fault condition is removed
Environment:
Working Temp / Humidity: -20℃～+60℃ / 20%～90 %RH
Storage Temp / Humidity: -40℃～+85℃ / 10%～95 %RH
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
Safety & EMC:
Safety Standard: Design refer to UL1012
Withstand Voltage: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Isolation Resistance: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
EMI CONDUCTION & RADIATION: Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B
Dimension &Weight & Packing: 78*51*28mm (L*W*H); 0.18Kg; 60pcs/11.8Kg/0.46CUFT
------------------------
Notice：
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
